5-Port Industrial PoE Switch (4 PoE + 1 Uplink)

VT-SW5P-4TPOE is an industrial unmanaged Ethernet switch with 4x 10/100Mbps PoE+ ports and 1x 10/100Mbps standard uplink port. The rugged IP40 metal housing and redundant DC48-57V power inputs provide reliable power and data transmission for edge devices in harsh environments from -40°C to +75°C.

Part No. VT-SW5P-4TPOE
sku : IoT-IPS100
INSTANT QUOTE

Power & Data over a Single Cable (IEEE 802.3af/at)

The VT-SW5P-4TPOE comes with 4 x IEEE 802.3af/at compliant 10/100Mbps PoE+ ports. It transmits network data and power (up to 30W per port, total 120W) over one ethernet cable, ideal for IP cameras, wireless access points and sensors.

PoE Data and Power transmission

Ruggedized for Harsh Environments (-40°C to +75°C)

This switch is designed for tough industrial environments with an IP40 rated metal case and a fanless heat dissipation design. It offers a reliable data transfer over an operating temperature range of -40°C to +75°C.

Industrial wide temperature operation

Redundant Power & EMC Protection

The unit has dual DC48-57V redundant power inputs via a 5-pin terminal block. Internal circuitry includes Level 3 ESD and Level 2 Surge protection to reduce interference in high-EMI industrial environments.

Power redundancy and EMC protection

Plug-and-Play Connectivity

Designed for immediate installation, the switch features auto-negotiation (10/100M, full/half-duplex) and MDI/MDI-X crossover. It includes an integrated 35mm DIN-rail mounting clip for standard industrial cabinet deployment.

DIN-rail installation and plug-and-play

Hardware Interface
PoE Ports (Downlink)4 × 10/100Base-T(X) RJ45, IEEE 802.3af/at, Max 30W per port
PoE pins: 1, 2 positive; 3, 6 negative
Ethernet Port (Uplink)1 × 10/100Base-T(X) RJ45 auto-sensing, Auto MDI/MDI-X
Switching Performance
Bandwidth & MAC1 Gbps / 2K MAC Address Table
Buffer & Jumbo Frame748 Kbit / 2048 Bytes
Power & Environment
Input VoltageDual DC 48-57V (Redundant Inputs), Anti-reverse connection
Power ConsumptionSystem: ≤ 1.2W / Total PoE output power: Max 120W
Operating Temperature-40°C ~ +75°C (Storage: -40°C ~ +85°C)
EMC ProtectionIEC 61000-4-2 (ESD) Level 3 / IEC 61000-4-5 (Surge) Level 2 / IEC 61000-4-4 (EFT) Level 3
Mechanical
Casing & MountingIP40 Metal casing, 35mm DIN rails
Dimensions / Weight102 × 33 × 78 mm / Approx 0.29 kg
📥 Documents & Datasheets

[Datasheet] Valtoris VT-SW5P-4TPOE Specification PDF →

Is a 100Mbps uplink sufficient for four IP cameras, or do I need Gigabit?
100Mbps is more than enough. This is a common concern but mathematically a modern 4K IP camera using H.265 compression needs only approximately 4 to 8 Mbps of bandwidth. Even with all 4 ports driving 4K cameras your total aggregate traffic will be less than 35Mbps. This switch is a very cost effective and reliable choice for standard CCTV topologies with the 100Base-T(X) uplink handling this with zero bottleneck.
Does the 5th Uplink port provide PoE power? Will it damage my NVR?
No PoE on the uplink, your NVR is completely safe. The VT-SW5P-4TPOE is designed with four dedicated PoE+ downlink ports and one data-only uplink port. This physical isolation ensures that no voltage is ever pushed to your upstream Network Video Recorder (NVR), core router, or PC, protecting your expensive infrastructure from accidental damage.
Why is a DC 52V-57V power supply recommended when the switch accepts 48V?
This is to combat Voltage Drop over long distances. While the switch board itself functions perfectly at DC 48V, copper Ethernet cables have physical resistance. If you run a cable close to the 100-meter limit to power a heavy-draw device (like a PTZ camera with active IR/heaters), the voltage at the far end will be significantly lower than 48V. Supplying a 52V or 57V input at the switch gives your edge devices the power needed to adhere to the IEEE 802.3at standard and prevent unpredictable camera reboots.

Request a Quote or Order Online

Check stock availability and access B2B pricing directly on our shop portal.

View in Valtoris Shop →

REQUEST A QUOTE

SKU/Part No.